Applicable fibers: Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia.: 125 μm / 160μm to 3mm by fiber holder system
Cleave length: 5mm to 13mm
Splice mode / heating mode: Total 100 splice modes / 30 heating modes
Splice loss0.05dB (SM), 0.02dB (MM), 0.08dB (DS) and 0.08dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time/tube heating time: Typical 15sec with SM / Typical 30sec with FP-03 (60mm) sleeve
Splice result storage: Last 2000 splices
Viewing methods/magnification: 2 axis CMOS camera with 4.47″ color LCD. 100X magnification.
Tension test: 1.96 to 2.25N
Applicable protection sleeve: 60mm, 40mm and Fujikura micro sleeves
No. of splice/heating per battery full charge: Typical 100 cycles with BTR-10 (one splicing and heating cycle per two min. under room temperature condition).
Electrode life: 3000 splices
Size/weight: 121W x 162D x 57H (mm) / 776g (including battery)
Operating condition:
– Altitude 0 to 3,660m above sea level
– Wind 15m/sec
– Temperature -10 to 50deg C
– Humidity 0 to 95%RH, non-dew
Resistance tests:
– Shock: 76cm (30inch) bottom surface drop
– Dust: Exposure to dust (0.1 to 500μm dia Alumina Silicate)
– Rain: H=10mm/hr for 10min
(Carried out in Fujikura labs in Japan. The shock, dust and rain resistance test do not guarantee the product will not be damaged under these conditions)
Other features: PC software upgrade/data management