The ComNet™ FVT1031-P series video transmitter along with the ComNet™ FVR1031 series receiver supports simultaneous broadcast-quality video transmission of 10-bit digital video and bi-directional RS422 data over one multimode or single mode optical fiber. The FVT1031-P is designed to plug directly into the Pelco Spectra III/IV dome, and connects with power, video input and two way data via the Pelco electrical connector.
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz – 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
DATA
Data Format: RS-422
Data Rate: DC-115 Kbps (NRZ)
WAVELENGTH: 1310/1550 nm, MM and SM
NUMBER OF FIBERS: 1
OPTICAL EMITTER: Laser Diode
CONNECTORS
Optical: ST
ELECTRICAL & MECHANICAL
Power: 8-15 VDC, 80 mA from Dome
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (LxWxH) 4.0 x 2.5 in., (10.16 x 6.4 cm)
Shipping Weight: <0.5 lb./0.225 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40° C to +75° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘/C’ to model number for conformal coating.
